skip to Main Content

Junior Change Table

Designed to accommodation for all needs.


The ABCO Junior Change table is designed and manufactured in Australia for use in schools, disabled accommodation, sports & special needs facilities and in other locations where younger clients need help with toileting or changing.

The top is 1250mm long and this can be extended up to 1650mm using the fold down cot ends. With a minimum height of less than 500mm clients can transfer to the change table independently, from a wheel chair or with a hoist (there is 155mm clearance below the frame for hoist clearance). Carers can adjust the working height to the best level for them (up to 950mm) using the foot control. One cot side and two cot ends – both generously upholstered – are fitted as standard for patient security. The four individually braked wheels make moving the table easy without compromising stability in use. One wheel has a directional locking brake to help control the table when moving.


Standard Material Colours

*colours are approximate – contact us for material samples or to discuss customised material options.


Couch Dimensions Overall Length 1250mm
Width 710mm
Upholstery Fabric Vinyl – Medical grade heavy duty vinyl fabric. Formulated to inhibit hardening and breakdown of the PVC surface due to perspiration and oils. Light fast, fire retardant, sanitised and stain resistant.
Foam 38mm high density foam rolled over the edges of the strong plywood base covered with 12mm of soft foam for enhanced comfort while providing a full working width and extended life.
Colours Wedgewood. Other colours on request
Frame Materials Heavy steel plate and tube
Colour Light Grey
Wheel System 125mm braked castors allowing 155mm clearance below the frame for patient hoist access
Height adjustment Range 450 – 950mm
Lift mechanism Two leg swing arm
Lift operation Genuine Linak brand European electric actuator system.
Control Foot control
Electrical Requirements Medically approved to AS 3200 / EN60601 – 1
Supply 230vAC ±10%, 50hz max 1.5amp
Operation 24vDC max 70VA
Lifting Capacity 200kg
Weight 70kg
Shipping Dimensions 140 x 82 x 60cm / 85kg. Shrink-wrapped on a wooden pallet with bubble wrap
ARTG No 123753
Warranty 5 years, parts only



Change Table Upholstered Cot Side

A factory fitted option providing a fixed side barrier to the table. The cot side swings below the side of the top upholstery for storage when not in use.


Change Table Upholstered Cot End

A factory fitted option providing a fixed end barrier to the table. The cot side swings below the side of the top upholstery for storage when not in use.


Change Table Strap Bar

Accessory for use with change tables where a patient strap is to be used. The strap bar is part of the standard upholstered cot side used on these tables and need only be ordered if a cot side is not available on either side of the table.


Patient Strap 200mm

This strap is made from strong black vinyl with velcro adjustments; and adjusts approximately 95-140cm with centre opening. The patient strap is secured with strap bars on either side of the table.



Product Enquiry

"*" indicates required fields

Sign up for email newsletters
This field is for validation purposes and should be left unchanged.
Back To Top