Daessy MH2/IPA and MH3/IPA- Multi-hole Inner Piece Adapter
Description
The Multi-hole Inner Piece Adapter is used in place of a standard inner piece when no tube is available to clamp around and when a square frame tube has existing bolt holes for attachment of accessories.
The MH3 part has seven countersunk bolt holes spaced at 1/2″ increments and two rows of seven threaded holes spaced at 1/2″ increments. The Inner Piece Adapter is attached with bolts into the threaded holes of the adapter after the component has been installed onto the wheelchair. It is possible to attach the MH3 part with bolts through the countersunk holes and nuts on the inside of the wheelchair frame or with 1/4″ bolts through the wheelchair frame and threaded into the threaded holes of the MH3 part.
The MH2 part is similar but with only five countersunk 1/2″-spaced bolt holes and two rows of five 1/2″-spaced threaded holes. The shorter overall length of the MH2 may allow it to fit on a wheelchair frame with only a short length of exposed tube. For round tube with bolt holes see the Multi-hole Round Tube Adapter.
Enquiry
Product Enquiry
"*" indicates required fields
Disclaimer
All product descriptions, indications or advice found on this website are to be used as a guide only, and are by no means a substitute for professional medical advice. Proper use of medical devices requires diagnosis by a physician or physical therapist. Urgoform accepts no responsibility for the improper or uninformed use of it’s products.
