P-SS-12 Lateral positioning wedge
Highly recommended for bedridden patients who require frequent position changes.
The lateral positioning wedge is highly recommended for bedridden users who require frequent position changes. Provides comfortable trunk support from one side (left or right). Thanks to the use of the thermoactive VISmemo™ foam, the wedge relieves the sensitive areas of the body and significantly reduces the risk of bedsores.
|Compliant with the REACH regulation aimed at ensuring a high level of health and environmental protection.|
|The PureMed™ cover has passed the CIGARETTE TEST and the MATCHSTICK TEST positively, which proves that it is a non-flammable fabric.|
|It is free of heavy metals, phthalates, allergic substances and carcinogens.|
|It is lightweight, soft, elastic and easy to shape.|
|It has OEKO-TEX STANDARD 100® certification which is granted to exceptionally skin-friendly parameters.|
|The fabric is waterproof.|
|The raw material has a hygienic certificate issued by the National Institute of Public Health.|
|PureMed™ is vapour-permeable in one way only – the air from the inside may migrate freely outside.|
|The fabric is breathable.|
|It is antibacterial and easy to disinfect.|
Structure and Maintenance
- Comfort foam
|PureMed™ – a fabric which is very safe for people. It is antibacteriala fabric which is very safe for people. It is antibacterialand easy to disinfect. Due to the fact that it contains antibacterialcomponents based on Silver Zeolite, PureMed™ fabric is perfect formultiple use by different users in hospitals or rehabilitation centers aswell as in cases of a high risk of infection. PureMed™ is light, soft andeasy to shape. This material compiles with the REACH regulation.|
|AirMesh™ – is a special aerating-massaging fabric used in the places, which have a directis a special aerating-massaging fabric used in the places, which have a directcontact with the user’s body. As a result, the comfort of use has significantly increased, andat the same time the risk of bedsores has considerably decreased.|
|VISmemo™ – it is a memory foam which adjusts its shape to the shape of the user’s body under pressure. Then, it becomes even softer due to the temperature of the user’s body. The VISmemo™ foam is the most active in the areas with the greatest bedsores risk. As a result, it is the highest standard in the anti-bedsore prophylaxis.|
|Off-loading foam – it is a rigid technical foam, created during the recycling process. The structure of this foam is closed which means that it goes back to its initial shape even after long-term lying of the user.|
|AntySlip™ – a special non-slip fabric which prevents the cushions and pillows from moving on the mattress.|
|VelcroFit™ – the STABILObed® elements are equipped with a set of Velcro which allows to position the elements on the mattress covered with a self-adhesive sheet as well as combine selected elements in various configurations.|
|Type of active agent or surfactant||Maximum content in the disinfectant||Spray the surface of the product with a disinfectant,
leave it on the surface for the required time,
then rinse with water and dry.
PureMed™ meets all the essential requirements of the medical products of different kinds, according to the Regulation of the Ministers of Health on 3 November 2004 and the requirements contained in Annex I to Council Directive 93/42/EEC of 14 June 1993 concerning medical devices , deployed by the law of 30 April 2004 of Medical Devices (OJ L 93 of 2004., pos. 896). It is a flexible fabric which is safe for people. It is antibacterial, waterproof, vapour permeable and easy to disinfect.PureMed™ should be cleaned according to the laundry guide. Coated materials should be cleaned with the use of neutral pH soap solution (about 7) applied with a soft sponge or a damp cloth. Rub gently and wipe dry to remove the rest of the detergent. In order to keep the original colour and shine level, the procedure should be repeated every month.
Stains should come out if you use 25% solution of ethanol. Rub gently and wipe dry to remove the rest of the detergent.
Please, bear in mind that some stains might not be completely removed from the cleaned surface. It depends on several factors like active dyers permanently migrating to the material surface, the material composition and finish, or chemical composition of dirt as well as the time the soiling has remained on the material surface.
You should pay particular attention to the generally available domestic cleansers whose components might react with the soiling and cause an effect contrary to what was originally intended.
Remember that PureMed™ should never be cleaned with domestic cleansers and cleaning agents that are generally recommended for ‘eco-leather’.
|PureMed™ Technical specification|
|Surface weight:||200 ± 15 [g/m²]|
|Type of PU coating:||100 [%]|
|Type of PES carrier:||100 [%]|
|Strength breaking along:||≥20 [daN/5cm]|
|Strength breaking:||≥10 [daN/5cm]|
|Waterproof:||≥2000 [mm of H₂O]|
|Vapor permeability:||≥300 [g/m²/24h]|
PureMed™ washable cover
A washable cover is the outer layer of all the STABILObed® cushions. It is made of soft, resilient and easy to disinfect fabric PureMed™ . The shape ofA washable cover is the outer layer of all the STABILObed® cushions. It is made of soft, resilient and easy to disinfect fabric PureMed™ . The shape ofthe cover is identical with the shape of a given cushion. Additionally, it has a zip which allows easy removal and putting on the cover. Each cover hasa permanent pictogram applied, which presents the safety rules and the ways of disinfecting the cover. In case the cover of your STABILObed® damages, there is no need to purchase a new cushion but only replace the cover.
The Terry Cover, which is made of soft, cotton fabric friendly for the skin of the user, is certified by OEKO-TEX® STANDARD 100. The shape ofthe terry cover is identical with the shape of a given cushion, it is dark blue and has a fastening which makes it easy to take off for washing. The terry cover should be treated as an individual product and be used by one user.
"*" indicates required fields